Adjusting or turning off the continuous backlighting
Your thermostat may feature a low level amount of backlighting until
you press any button, which increases the lighting temporarily. You can
adjust the intensity of the backlighting or turn if off completely. Here's
how.
( )()U)
1. Open the door.
2. Press the buttons underneath the heat and cool
temperatures simultaneously (the two bottom buttons
on the right). The screen will display the reset reminders
and 01.
3. Press the button under the configuration number, 01
(second button from the right), until the number changes
to 03 with 3 next to it.
4. To increase the amount of backlighting, press the up
button. To decrease the amount, press the down button.
The range is 1 to 5 with 1 being the lowest.
0000@@
CID_
0
0000@0
C )CID C_
000000
5. Press the down button until Of is displayed.
00000@
To Next Page
Loading...
Need help?
General
