Carrier Performance EDGE User Manual

Using the fan
When the fan is on, it helps distribute air throughout your home for a
more even temperature in all spaces. You can set the thermostat so
that the fan runs only during your heating and cooling cycles (auto
mode) or to run continuously.
1. Open the door.
2. Press the fan button on the top. The arrow underneath
the button moves from auto to on.
3.When you want to return the fan to auto mode, press
the fan button again. You will see the arrow next to auto
under the button.
o
000000
4. Close the door.
ii

Carrier Performance EDGE Specifications

General

Brand	Carrier
Model	Performance EDGE
Category	Thermostat
Language	English