15
On the Web Portal:
A170288
1. Select the My System tile.
2. Select Smart Home / A way
3. Select Enable or Disable
Humidifier
The Humidifier menu enables or disables a whole home humidifier, if installed:
S On: Run the humidifier to increase the humidity to the configured set point.
S Off: Do not operate the humidifier.
On Thermostat and Smartphone App:
Touch Menu > System > Humidifier
On Web Portal:
1. Select the My System tile
2. Select Humidifier
There are two options for humidity control:
S Manual: you select the humidity set point
S Window Protect: Creates comfortable humidity levels in the home while preventing condensation from forming on your windows.
On Thermostat and Smartphone App:
1. Touch Menu > Profiles > Humidity Profiles > Humidification Setpoint
2. For manual adjustment, touch Manual then use the up or down arrows to select the desired humidity set point between 5% - 45%
3. To use Window Protect, touch Window Protect then use the up or down arrows to select the desired level between 1 - 7, with 7 being
for the most efficient windows.
4. Touch Save
On the Web Portal:
1. Select the My System tile
2. Select Humidifier
3. For manual adjustment, touch On then use the slider to select the desired humidity set point between 5% - 45%
4. To use Window Protect, touch Window Protect then use the slider to select the desired level between 1 - 7, with 7 being for the most
efficient windows.
5. Touch the X in the upper right corner to close the window
To Next Page
Loading...
