Carrier Performance Series User Manual

24
d Hold until a specific time
d Always ask you
Access Control
You can prevent people from making changes your thermostat’s set points, schedule, vacation, or system settings by configuring a 4 - digit
security code. If enabled, the security code will be required to access and change these settings.
On Thermostat:
1. Touch Menu > Settings > Access control
2. If the security code is currently disabled (default setting), touch Enable passcode. Otherwise, enter the existing security code.
3. Touch the feature(s) you want to protect:
d All
d Settings
d Schedule
d Vacation
4. Touch Next
5. Establish a new 4- digit access code? Yes/No
6. Enter code, touch Save
7. Then Done
To remove an existing security code:
1. Touch Menu > Settings > Access control
2. Enter the existing security code.
3. Touch Disable passcode
4. Touch Disable and Save
5. If you forget your access code, call customer support to have it reset.
On Web Portal:
1. Select Settings tile.
2. Select Access Control.
3. If the security code is currently disabled (default setting), select Enable and enter a new code and touch Save.
Otherwise, enter the existing security code.
4. Select the feature(s) you want to protect:
d All
d Settings
d Schedule
d Vacation

Carrier Performance Series Specifications

General

Brand	Carrier
Model	Performance Series
Category	Thermostat
Language	English