Need help?Do you have a question about the Carrier RG56 and is the answer not in the manual?
General| Model | RG56 |
|---|---|
| Brand | Carrier |
| Compatibility | Carrier Air Conditioners |
| Battery Type | AAA |
| Number of Batteries | 2 |
| Type | Remote Control |
Install batteries into the remote control unit for operation.
Ensure the remote control faces the indoor unit for signal transmission.
Activate the air conditioner by pressing the ON/OFF button.
Choose the desired operating mode from Auto, Cool, Dry, Heat, or Fan.
Set the desired room temperature within the specified range.
Adjust the fan speed to Auto, Low, Medium, or High.
Shows the selected operating mode such as Auto, Cool, Dry, Heat, or Fan.
Lights up when the remote control sends signals to the indoor unit.
Shows the set temperature (17°C-30°C) or timer setting (0-24h).
Indicates when the air conditioning unit is currently operating.
Displays the selected fan speed: AUTO, HIGH, MED, or LOW.
Shows when the Follow Me function is activated for remote sensing.
Indicates the settings for the timer functions (ON, OFF, or ON/OFF).
UP and DOWN buttons to adjust the desired temperature setting.
Cycles through different operation modes like Auto, Cool, Dry, Heat, and Fan.
Starts or stops the operation of the air conditioner.
Controls the movement of the horizontal and vertical louvers for airflow direction.
Activates or deactivates the self-cleaning and ionizer functions.
Controls Follow Me function and activates Smart Eye for human detection.
Allows selection of fan speed among AUTO, LOW, MED, and HIGH.
Initiates the auto-on timer sequence, setting the unit to start at a specific time.
Initiates the auto-off timer sequence, setting the unit to stop at a specific time.
Activates the sleep mode for comfortable temperature and energy saving.
Enables rapid cooling/heating (Turbo) or quiet operation (Silence).
Controls the display lights and activates freeze protection mode.
Unit automatically selects mode, fan speed, and temperature based on ambient conditions.
Manual selection of Cool, Heat, or Fan mode with temperature and fan speed control.
Unit operates in dehumidification mode with fixed fan speed.
Program the unit to automatically turn on, turn off, or both at specified times.
To Next Page