Carrier RG66B3/BGEF - Page 4

3
FunctionButtons
Before you begin using your new air conditioner, make sure to familiarize yourself with its
remote control. The following is a brief introduction to the remote control itself. For instructions
on how to operate your air conditioner, refer to the How to Use The Basic/Advance Functions
section of this manual.
NOTE Please do not select HEAT mode if the machine you purchased is cooling only type.
Heat mode is not supported by the cooling only appliance.
ON/OFF
Turns the unit on or off
Mode Fan
TimerTimer
Follow
me
LED
Self
clean
Turbo
Fresh
ON/OFF
MODE
Scrolls through operation
modes as follows:
AUTO → COOL → DRY
→ HEAT → FAN
ECO/SLEEP
Starts and stops energy
efcient feature. If hod
down this button for more
than 2 seconds, the sleep
feature is activated.
TIMER
Sets timer to turn unit
on and off (see How to
Use Basic Functions for
instructions)
LED
Turns indoor unit’s LED
display on and off.
FOLLOW ME
Temperature sensing and
room temperature display
button.
TURBO/FRESH
Enables unit to reach
preset temperature in
shortest possible time.
If hold down this button
for 2 seconds, the Fresh
feature is activated.
INTELLIGENT EYE
Detects the people activities
in the room.
Model: RG66B4(2H)/BGEF
FAN
Selects fan speeds in the
following order:
AU% → 20% → 40% →
60% → 80% → F% (100%).
Press the Adjust
+ or –
button to increase/decrease
the fan speed in 1%
increments.
TEMP
+
Increases temperature in
1 °F (0.5 °C) increments
for each press. If pressing
and holding down this
button, the temperature
will increase in 1 °F (1 °C)
increments.
Max. Temperature is 86 °F
(30 °C).
TEMP
–
Decreases temperature in
1 °F (0.5 °C) decrements
for each press. If pressing
and holding down this
button, the temperature
will decrease in 1 °F (1 °C)
decrements.
Min. temperature is 60 °F
(16 °C).
SWING
Starts and stops horizontal
louver movement.
SWING
Starts and stops vertical
louver movement.
SELF CLEAN
Starts and stops the unit self
clean feature.