Need help?Do you have a question about the Carrier SINGLE-PACKAGE HEAT PUMP 50YQ and is the answer not in the manual?
General| Cooling Capacity | 2 to 5 tons |
|---|---|
| SEER | Up to 16 |
| Refrigerant | R-410A |
| Voltage | 208/230-1-60 |
| Phase | 1 |
| Sound Level | 76 dB |
Verify unit and site readiness before installation begins.
Procedures for mounting the heat pump on ground or roof.
Connect supply and return air ductwork to the unit.
Set up condensate drainage for cooling cycle.
Steps for wiring the unit and its components.
Set heat anticipators for optimal room thermostat operation.
Function and installation of accessory outdoor thermostats.
Step-by-step instructions for starting the unit after installation.
How the defrost control system removes frost.
Procedures for charging the unit with refrigerant.
Servicing AccuRater components for proper operation.
Step-by-step guide for safely removing the compressor.
Compressor and fan motor lubrication requirements.
Guidance on cleaning and maintaining the indoor coil.
Instructions for cleaning and inspecting the outdoor coil.
Procedure for removing the outdoor fan and motor assembly.
Chart for diagnosing cooling cycle issues and causes.
Chart for diagnosing heating cycle issues and causes.
To Next Page
