Carrier SYNERGY 2000 38YDA User Manual

Product
Data
SYNERGY 2000
38YDA (60 Hz)
Two-Speed Electric
Heat Pump
Sizes 036, 048, and 060
Copyright 1997 Carrier Corporation Form 38YDA-3PD
Model 38YDA Heat Pumps
incorporate innovative 2-speed
compressor technology to provide
quiet, efficient summer cooling and
winter heating performance. Built into
these units are features most desired by
homeowners today, including SEER
ratings up to 16.1 and HSPF of 8.8
when used with the components
designated by the manufacturer. All
models are UL, c-UL, and CSA-EEV
approved. Performance ratings are ARI
and CEC listed.
FEATURES/BENEFITS
Electrical Range — All units are
offered in 208/230v single phase.
Simplified field-stripped lead wire
connections facilitate ease of
installation.
Range of Sizes — Available in
3 nominal sizes 036, 048, and 060 to
meet the needs of residential
applications.
Weather-Armor II Cabinet — Steel
is galvanized and coated with a layer of
zinc phosphate. A coat of modified
polyester powder coating is then
applied and baked on providing each
unit with a hard, smooth finish that will
last for many years.
All screws on the cabinet exterior are
ceramic coated for a long-lasting, rust-
resistant, high-quality appearance.
Unit Design — The coil incorporates
copper tubing and enhanced,
aluminum fins for optimum heat
transfer. Hot condenser air and sound
are discharged vertically and away
from adjacent patio areas and foliage
through the top. Polymer spacers raise
the coil in a deep draw-style basepan
for easy removal of water, dirt, and
debris.

Carrier SYNERGY 2000 38YDA Specifications

General

Brand	Carrier
Model	SYNERGY 2000 38YDA
Category	Heat Pump
Language	English

Summary

Product Overview and Features

Model Introduction

Introduction to the SYNERGY 2000 38YDA Heat Pump.

Features and Benefits

Key advantages and functional aspects of the heat pump unit.

Electrical Range

Details on voltage and phase requirements for installation.

Physical, Electrical, and Dimensional Data

Physical Data

Technical specifications including weight, refrigerant, and coil data.

Electrical Data

Detailed electrical specifications for compressor, fan, and wiring.

Dimensions

Physical measurements and clearance requirements for installation.

Performance Data and Ratings

Balance Point Worksheet

Chart for determining heat pump performance balance points.

Combination Ratings

Cooling and heating capacities for various indoor unit combinations.

Ambient Temperature Operation

Operating temperature limits for high and low-speed modes.

System Design and Service

Matched System Design

Guidelines for designing a complete system with the heat pump.

Service Training

Information on training programs for equipment maintenance and troubleshooting.