OPERATING THE THERMOSTAT
Using the thermostat to turn the heating and cooling system off
To use the thermostat to turn the heating and cooling system _J_ oO/]
off, press the mode button on the left repeatedly until the •
display shows off in the upper left. 0
Auto changeover
The thermostat uses one of five modes: heat, cool, Em heat (heat pump version
only), auto, and off. When the mode selection is auto, the thermostat is in auto
changeover mode. This allows the system to switch from heating to cooling - or
from cooling to heating - to maintain the temperatures you've set. It does this
automatically.
To Next Page
Loading...
