To Next PageTo Next Page
Need help?Do you have a question about the Carrier TP-WEM01 and is the answer not in the manual?
Menu for configuring the thermostat's connected heating and cooling equipment types.
Sets the temperature difference required to engage cooling, impacting system cycling and comfort.
Sets the temperature difference required to engage heating, affecting system cycling and comfort.
Ensures the compressor runs for a minimum duration to prevent short cycling and equipment damage.
Specifies the minimum time the compressor must remain off between cycles to allow refrigerant pressure equalization.
Ensures auxiliary heat runs for a minimum duration to prevent short cycling of the backup heating system.
Sets the temperature difference for engaging furnace heating, influencing system cycling and comfort.
Ensures the furnace heating operates for a minimum duration to prevent short cycling.
Overview of dehumidification features available for general cooling equipment.
Dehumidification features tailored for variable speed Carrier cooling equipment.
Advanced system for enhanced dehumidification using Carrier's intelligent technology.
Implementation of Ideal Humidity System® Technology with specific FK/FV fan coil units.
Standard dehumidification setup for FX4 fan coils using multi-tap ECM motors.
Full implementation of Ideal Humidity System® Technology with Infinity® furnace units.
Dehumidification setup for Performance series furnaces with PSC motors.
Menu for configuring the thermostat's connected heating and cooling equipment types.
Sets the temperature difference required to engage cooling, impacting system cycling and comfort.
Sets the temperature difference required to engage heating, affecting system cycling and comfort.
Ensures the compressor runs for a minimum duration to prevent short cycling and equipment damage.
Specifies the minimum time the compressor must remain off between cycles to allow refrigerant pressure equalization.
Ensures auxiliary heat runs for a minimum duration to prevent short cycling of the backup heating system.
Sets the temperature difference for engaging furnace heating, influencing system cycling and comfort.
Ensures the furnace heating operates for a minimum duration to prevent short cycling.
Overview of dehumidification features available for general cooling equipment.
Dehumidification features tailored for variable speed Carrier cooling equipment.
Advanced system for enhanced dehumidification using Carrier's intelligent technology.
Implementation of Ideal Humidity System® Technology with specific FK/FV fan coil units.
Standard dehumidification setup for FX4 fan coils using multi-tap ECM motors.
Full implementation of Ideal Humidity System® Technology with Infinity® furnace units.
Dehumidification setup for Performance series furnaces with PSC motors.
General| Brand | Carrier |
|---|---|
| Model | TP-WEM01 |
| Category | Thermostat |
| Language | English |
