13 | P a g e
Equipment Configuration
WARNING! Advanced settings and configuration options are located in the service
menus. These settings are intended for professional installers only. Incorrect
configuration of the system may lead to improper operation and system damage.
Accessing the Service Menus
On Thermostat:
1. Touch Menu
2. Touch and hold Service Icon (about 10 seconds) until the service menu
with Installation Settings shows.
Edit Service Information
Insert your contact information under Edit Service Information. This will ensure
the customer has your contact information under the Service icon as well as
displayed on all alerts and reminders. The default displays contact information
for Carrier Customer Support.
On Thermostat:
1. Touch Menu > (hold) Service > Edit Service Information
2. Touch the information you would like to edit
3. Use the keyboard to input your information
4. Touch Save
5. Repeat until all fields are updated
6. Touch Done
To Next Page
Loading...
