EasyManua.ls Logo

Carrier Thermidistat - Thermidistat Control Configuration Record

Carrier Thermidistat
12 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THERMIDISTAT CONTROL CONFIGURATION RECORD
Date
Owner/Operator
A) Hardware Configuration
Switch A ____ AC/HP Select. (OFF = AC)
Switch B ____ 1 or 2-Speed Compressor. (OFF = 1-Speed)
Switch C ____ Smart Recovery. (OFF = Enable)
Switch D ____ Installer Test. (OFF = Disable)
Thermidistat Model No.
B) Mode Settings
____ Hold (On or Off)
____ Mode (Off, Heat, Cool, Auto, Eheat)
____ Heating Set Point Value
____ Cooling Set Point Value
____ Fan (Auto or On)
C) Configuration Options
D) Schedule
E) Humidity Settings
Heat Mode Cool Mode
Selection Set Point% Display
Normal Humidify _________ (hu)
Fan Humidify _________ (hu, Fan)
Auto Humidify _________ (hu, AUTO)
Auto and Fan Humidify _________ (hu, AUTO, Fan)
Humidify Off no set point (hu, OF)
1 ______ Anticipator (1-9: factory default = 3)
2 ______ Clean Filter Timer (Off or 1-9: factory default = 2)
3 ______ Fahrenheit or Celsius (F or C: factory default = F)
4 ______ Fan On with W (Off or On: factory default = Off)
5 ______ Variable Speed ICM Motor (Off or On: factory default = Off)
6 ______ Cooling Lockout Below 55°F (Off or On: factory default = Off)
7 ______ Variable Speed Superdehumidify (Off or On: factory default = Off, or Not Available)
8 ______ Auxiliary Heat Lockout Setting (Off or 5-55°F: factory default = Off, or Not Available)
9 ______ Intelligent Heat Staging Selection (Off or On: factory default = Off, or Not Available)
10 ______ Dual Fuel Equipment Selection (Off or On: factory default = Off, or Not Available)
11 ______ Balance Point Setting (Off or 5-55°F: factory default = Off, or Not Available)
12 ______ Defrost Heat Select (0, 1, 2, 3: factory default = 0, or Not Available)
13 ______ Room Temperature Offset (-5 to +5: factory default = 0)
14 ______ Heat/Cool Dead Band (0 to 6: factory default = 2)
15 ______ Enable Auto Mode (On or Off: factory default = On)
16 ______ Enable Super Comfort Heat Mode (Off or On: factory default is Off, or not Available)
17 ______ Enable Non-Programmable Operation (nP or P: factory default is P for programmable)
Mon
Tue
Wed
Thu
Fri
Sat
Sun
TIME HEAT COOL TIME HEAT COOL TIME HEAT COOL TIME HEAT COOL
WAKE DAY EVE SLEEP
A99015
Selection Set Point% Display
Normal Dehumidify _________ (d hu)
Cool to Dehumidify _________ (d hu, COOL)
Dehumidify Off no set point (d hu, OF)
E) Vacation Humidity Settings
Heat Mode Cool Mode
Selection Set Point% Display
Normal Humidify _________ (hu, OUT)
Auto Humidify _________ (hu, OUT,AUTO)
Auto and Fan Humidify _________ (hu, OUT,AUTO, Fan)
Humidify Off no set point (hu, OUT, OF)
Selection Set Point% Display
Normal Dehumidify _________ (d hu, OUT)
Cool to Dehumidify _________ (d hu,OUT,COOL)
Dehumidify Off no set point (d hu, OUT,OF)
Cut and Save for Customer File
Copyright 1999 CARRIER Corp. 7310 W. Morris St. Indianapolis, IN 46231 tstt23si
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Book 1 4
Tab misc. misc.
PC 101 Catalog No. 03TS-TA17 Printed in U.S.A. Form TSTAT-23SI Pg 12 8-99 Replaces: TSTAT-19SI

Related product manuals