To Next PageTo Next Page
Need help?Do you have a question about the Carrier THERMIDISTAT CONTROL and is the answer not in the manual?
General| Display | Backlit LCD |
|---|---|
| Power Source | 24VAC |
| Wi-Fi Capable | No |
| Indoor Humidity Display | Yes |
| Filter Change Alert | Yes |
| Keypad Lock | Yes |
| Humidity Control | Yes |
| Programmable | Yes |
| Type | Thermidistat Control |
Instructions for setting desired heating and cooling temperature points on the Thermidistat Control.
Guide to setting the correct time on the Thermidistat Control, including Daylight Savings adjustments.
How to select operating modes like OFF, HEAT, COOL, AUTO, and EHEAT on the Thermidistat Control.
Instructions for choosing between ON and AUTO fan operation modes for optimal air circulation.
How to adjust humidity levels from 10% to 45% for desired indoor comfort.
Guide to setting dehumidification levels from 50% to 90% for moisture control.
Enabling moderate dehumidification by running the air conditioner, even in cooling mode.
How the Thermidistat Control indicates when to change or clean the air filter.
Configuring separate temperature and humidity settings for vacation periods.
How to view the current room temperature and temperature set points on the display.
Steps to display outdoor temperature and indoor humidity readings.
How to view current humidity and set points for humidification/dehumidification.
How to activate vacation mode before leaving and resume normal operation upon return.
Explanation of the AUXILIARY HEAT indicator on heat pump systems.
Meaning of the CLEAN FILTER indicator and how to reset it.
Understanding the OUT indicator, which signifies the system is in vacation mode.
Interpreting indicators for cooling (COOL) and heating (HEAT) equipment operation.
How power outages affect Thermidistat Control settings and clock operation.
Decoding error codes (E3, E4, E5, E6) displayed by the Thermidistat Control.
Definition of auxiliary heat as supplemental heating for heat pump systems.
Explanation of the air filter cleaning reminder and indicator.
Definition and suggested settings for dehumidification levels.
Definition of emergency heat, indicating auxiliary heat use without the heat pump.
Explanation of fan operation modes: continuous vs. automatic for air circulation.
Definition and suggested settings for desired indoor humidity levels.
Explanation of different operating modes: OFF, HEAT, COOL, AUTO, and EHEAT.
How the Thermidistat Control measures and displays outdoor temperature.
How power outages are handled, including internal power source and setting retention.
Procedure to reset the CLEAN FILTER indicator after filter maintenance.
Instructions for activating the function to set the correct time on the thermostat.
Explanation of temperature sensors measuring indoor and outdoor temperatures.
Definition of desired heating and cooling set points entered into the control.
Information on the current time display on the Thermidistat Control.
Function of UP and DOWN buttons for setting clock and entering temp/humidity info.
