29
OPERATING THE THERMOSTAT
Using the thermostat to turn the heating and cooling system off
Here’s how to use the thermostat to turn the heating and cooling system off.
1. Open the door.
2. Press the mode button on the top left repeatedly until the
display shows off in the upper left.
3. Close the door.
Using the fan
When the fan is on, it helps distribute air throughout your home for a more even
temperature in all spaces. You can set the thermostat so that the fan runs only
during your heating and cooling cycles (auto mode) or to run continuously.
1. Open the door.
2. Press the fan button on the top. Th e arrow underneath the
button moves from auto to on.
3. When you want to return the fan to auto mode, press the
fan button again. You will see the arrow next to auto un-
der the button.
4. Close the door.
To Next Page
Loading...
Need help?
General
