2-- 11
62--11362
2.2.4 Injection Pump and Gear Case (Continued)
1. Fuel Camshaft Stopper
2. Fork Lever Holder Mounting
Screws
3. Fork Lever 1
4. Fork Lever 2
5. Injection Pump Gear
6. Fuel Camshaft
7. Fork Lever Holder
1. Oil Pump
2. Oil Pump Drive Gear
3 Gear Puller
2.2.4.i Fuel Camshaft And Fork Lever Assembly
1. Detach the fuel camshaft stopper (1).
2. Remove the three fork lever holder mounting screws
(2).
3. Remove thefuel camshaft assembly (5),(6) and fork
lever assembly (3), (4), and (7) at the same t ime.
When Reassembling
After installation, check to see that the fork levers 1 (3)
and 2 (4) are fixed to the fork lever shaft, and that they
can turn smoothly in the holder (7).
2.2.4.j Oil Pump
1. Remove the nut.
2. Drawout theoil pumpdrivegear(2) witha gear puller
(3).
3. Removethefour oil pumpmountingbolts.Detachthe
oil pump (1).
Downloaded from ManualsNet.com search engine
To Next Page
Loading...