6
62--61177--01
Automatic start :
This refrigeration unit is equipped with Auto--Start/Stop, a valuable fuel saving feature.
When this refrigeration unit is set for Auto--start/Stop operation it may start at any time
and without warning.
Before servicing refrigeration unit, make sure the main power switch is on the OFF position. Ensure the
unit will not restart.
Lock--out / Tag--out can be performed by disconnecting and enclosing :
-- The negative battery cable in diesel mode
-- The electrical plug in electrical mode.
Belts and fans :
This refrigeration unit is equipped with Auto--start/stop, it may start at any time and
without warning.
When the unit is running beware of belts and fans that are moving.Before servicing refrigeration unit,
make sure the main power switch is on the OFF position.
Ensure the unit will not restart. Lock--out / Tag--out can be performed as described above.
When there is protective structure (fan grid or guard for example) make sure they are in place. Never
removed them when the refrigeration unit is running.
Always keep your hands, body parts, clothes, hairs and tools far from moving parts.
Electricity :
When this refrigeration unit is running in electrical operation, some devices are powered
up especially in the electrical control box.
Before servicing refrigeration unit, make sure the main power switch is on the OFF
position. Ensure this refrigeration unit is disconnected from the local electrical
network.Lock--out / Tag--out can be performed as described above.
Before working in the electrical control box, it is required to control the lack of tension.
WHEN IT IS NECESSARY TO WORK IN THE ELECTRICAL CONTROL BOX UNDER
TENSION, PEOPLE MUST BE QUALIFIED FOR WORKS UNDER LOW OR HIGH
VOLTAGE.
Always use adequate tools and Personal Protective Equipment when working on
electrical devices : safety gloves and safety glasses.
To Next Page
Loading...
