Carrier XCT7 40VH A-7G Series - Page 19

11
Operation instruction
Timing
1. Select an operating mode after startup.
Corresponding mode indicator ashes on wire control.
2. ON/OFF Timing
Press timing button to select timed startup or timed shutdown. Timing mode changes each time the button is
pressed in cycle below:
Timed Startup Timed Shutdown Untimed
3. Timing
With wire control in timed status, timed startup indicator ashes or timed shutdown indicator ashes, then press
time tuning button.
Each time " " button is pressed; timing is prolonged by 10 minutes.
Each time " " button is pressed; timing is shortened by 10 minutes.
Timing tuning is free within the 24-hour range.
4. Conrmation
After time tuning is done, press setting button to conrm. Timing indicator constantly shines on wire control.
5. Cancellation
When timing indicator constantly shines, press setting button; timing indicator turns o󰀨; timing is cancelled.
6. Shutdown: press ON/OFF button