GB
16
DRAGSTER XL Brushless-Regler
6. Setting the electronic speed controller
The speed controller can be operated immediately after it has been
synchronized with the transmitter. However, specific parameters can be
adjusted to suit particular conditions.
Other adjustments to Dragster XL controller parameters can only be
made using the CARSON Dragster XL SETUP Box available for separate
purchase (N
o
50 090 6091).
The following parameters may be selected:
Battery Type LiPo Auto Detec., NiCd/NiMH
Operation mode Forward/reverse, forward only
Braking action 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%
Engine brake 0%, 4%, 8%, 12%, 15%, 20%, 25%, 30%
Motor Timing Low, normal, high
Acceleration Low, medium, high
Forward limit 0%, 10%, 20%, 30%, 40%, 50%, 60%, 70%,
80%, 90%
Reverse limit 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%
100%
ESC frequency 8 kHz, 16 kHz
Dead Band 2, 3, 4, 5, 6
Direction of Normal, reverse
rotation
Defaults No, yes
Saving...
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
To Next Page
Loading...
