Carson MicroFlip MP-250 Quick Start Guide

INSTALLING THE BATTERY
Slide battery door open.
Insert 1 AA alkaline battery
and replace battery door.
ADJUSTING ZOOM & FOCUS
..__.,
...
..
Insert a prepared slide into the
Press the LED switch
slot between the objective lens
for light.
and the base plate.
Flip base plate down to sit underneath
the objective lens.
Please note,
when base plate is down
only downard facing LED will illuminate.
2
Press the LED switch Base plate should be in upright Place the viewing
for light. position (behind battery door.) object directly below
the objective lens.
Please note, when base plate is
in upright position only front facing
LED will illuminate.
WARNING: Do not look
directly at LED light.
Adjust zooming dial Rotate focusing ring
for desired level of until the image is
magnification. clear and sharp.
USING MICROSCOPE TO VIEW OBJECTS DIRECTLY
USING MICROSCOPE TO VIEW SPECIMEN SLIDE
WARNING: Use only alkaline battery. Keep away from fire or
excessive heat. Inspect battery for corrosion or leakage.
Insert in direction indicated. Rechargeable battery not
recommended.

Carson MicroFlip MP-250 Specifications

General

Illumination	Yes
Maximum magnification	250 x
Minimum magnification	100 x
Product color	Black, Stainless steel
Microscope type	Digital microscope
Built-in display	-
Power source	Battery
Built-in camera	No

Weight and Dimensions

Depth	61 mm
Width	32 mm
Height	109 mm
Weight	74 g
Package depth	36 mm
Package width	66 mm
Package height	135 mm
Package weight	111 g