Brake Pedal Throttle Pedal
Fig.2
a. Throttle
The right foot pedal is the throttle that controls the MINI-Talon speed. As the engine
speed increases above idle, the vehicle moves forward.
WARNING
Each time, prior to starting the engine, check the
throttle and brake to ensure that when the pedals
are pushed all the way forward the assembly is
working smoothly and returns when released. Do
not operate if pedals fail to return. If unable to
correct the problem through lubrication,
adjustment, or replacement of worn parts, contact
your dealer for assistance.
OPERATION
WARNING
When starting your MINI-Talon the kart should
never “buck” or move forward. As the rope is
pulled to start the engine, the inertia wheel spins.
If the kart moves or pulls forward as the rope
start is pulled, the rubber-molded disc is making
contact with the inertia wheel and must be
correctly adjusted prior to operation. If you are
unable to adjust, or feel uncomfortable
performing the adjustment, contact your dealer
for assistance.
b. Brake
The brake is located on the left side of the MINI-Talon. Applying pressure to the pedal
pulls the caliper to the brake disc and slows or stops the kart.
WARNING
Prior to starting the engine, push the kart forward
then apply the brake. If the kart does not stop,
the brake is not adjusted correctly. Adjust the
brake for correct operation prior to using the
MINI-Talon. If you are unable to adjust, or feel
uncomfortable performing the adjustment,
contact your dealer for assistance.
c. Start the engine in accordance with the engine manual.
13
To Next Page
Loading...