Replace the battery
There is a 12V battery with one negative pole (-) grounded.
If battery cannot be charged or store any electricity, replace the battery with same model.
Replace the fuse.
If the electrical device does not work, please firstly check the fuse.
Important: please install the fuse with correct amperage, so as to prevent against burning of electrical system due
to overloading!
Others
Check if the bucket teeth is worn or
loosened
Replace the bucket and connect the
new one to machine.
If needed, replace the bucket and connect the new one to
machine.
Adjust the connecting rod of bucket
Take down the traveling lever
Check and replace the fuse
Check the track defection
Check the fuel injection timing
Check the bolts and nuts for
tightening torque
Note:
★ Maintenance interval under normal conditions
Maintenance needed at the f irst inspection
Check the bucket teeth --- each day
1. Check if the bucket teeth is worn or loosened.
Worn beyond the service limit, the bucket teeth may be replaced.
Bucket tooth dimensions mm
34
To Next Page
Loading...
