36
Microprocessor Battery Charger DP4.0 / DP6.0 / DP10.0
SAFETY FUNCTIONS
• The charge is protected from user error and prevents damage to
the connected battery.
• No risk of overcharging!
• The charger will not damage the electronics in your vehicle.
Protection Description
Abnormal
Operation
To avoid damage to charger and
battery, the charger will turn o its own electronic
system and will immediately reset the system to
basic settings in the case of
• short circuit
• wrong connection
• open circuit
• reversed polarity connection
• Battery voltage below 3.0V ±0.5V
The charger will remain in standby mode and the
display shows the error indicator.
Overheat
During the charging process, if the charger beco-
mes too hot or due to high ambient temperature, the
power output is automatically reduced.
The charger continues to trickle charge and automa-
tically starts increasing power when the temperature
drops.
MCU
Control
Fully controlled by internal Micro-Computer-Unit
(MCU), which assures a faster, powerful, reliable and
smarter charging process.
To Next Page
Loading...