Carver 3600 STC - User Manual

CARVER
INSTALLATION AND SERVICING
INSTRUCTIONS
FOR THE
3600 STC & 3600 STC AUTO CARAVAN HEATERS
LEAVE THESE INSTRUCTIONS WITH THE APPLIANCE
THIS APPLIANCE MUST BE INSTALLED IN ACCORDANCE WITH THE MANUFACTURERS
INSTRUCTIONS AND THE REGULATIONS IN FORCE AND ONLY USED IN A SUITABLY VENTILATED
LOCATION. READ THE INSTRUCTIONS FULLY BEFORE INSTALLING OR USING THIS APPLIANCE.
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans

Summary

Safety and Installation Warnings

Electrical Connection Polarity Warning

Crucial warning about observing electrical polarity to prevent component damage.

Heater Fitting Procedures

Floorplate Positioning Warning

Critical warning against positioning the floorplate over floor covering for an airtight seal.

Flue and Cowl Installation

Gas Supply and Electrical Connections

Gas Supply Connection Procedure

Connecting the gas feed pipe, checking for leaks, and ensuring no strain on pipes.

12 v;9 v DC Electrical Supply Connection

Connecting the 12v/9v DC supply, observing polarity and fuse protection.

Final Assembly and Testing

Testing the 3600 STC Heater

Procedure for testing the 3600 STC, including purging, lighting, and temperature adjustment.

Testing the 3600 STC AUTO Heater

Servicing and Fault Finding

Fault Diagnosis Guide

Troubleshooting Flowchart

A step-by-step flowchart for diagnosing and resolving ignition system faults.

Carver 3600 STC Specifications

General

Brand	Carver
Model	3600 STC
Category	Heater
Language	English