To Next PageTo Next Page
Need help?Do you have a question about the CARVIN SANICLEAR20 and is the answer not in the manual?
General| Brand | CARVIN |
|---|---|
| Model | SANICLEAR20 |
| Category | Lighting Equipment |
| Language | English |
Covers risks of shock, fire, injury, specific grounding, and service professional requirements.
Includes warnings about children, pest control, spa owner advice, and temperature limits.
Prepare water chemistry and balance before activating the salt chlorinator.
Details on outdoor mounting, vertical position, and ensuring proper ventilation.
Connecting to the return line and ensuring correct flow switch orientation.
Ensuring the system is powered only when the pump runs and understanding voltage configurations.
Details on 240VAC/120VAC connections and specific grounding requirements for Canada.
Describes connector locations and installation for the cell and flow switch.
Instructions for connecting the salt chlorinator directly to 120/240vac power.
Lists target values for chlorine, pH, alkalinity, calcium hardness, and cyanuric acid.
Specifies salt purity, type, and additives to avoid for optimal performance.
Provides instructions for adding salt to different pool types and distribution.
Details the method for reducing salt concentration by draining and refilling the pool.
Highlights the importance of monthly testing for stabilizer (cyanuric acid) levels.
Provides a chart to calculate the amount of stabilizer needed based on pool volume.
Advises on using poly algaecide and its recommended application rate.
Explains how the system sanitizes the pool using electrolysis and salt conversion.
Controls the percentage of time the SANICLEAR system will produce chlorine.
Explains the meaning of Power, Generating, Super Chlorinate, No Flow, Check Salt, High Salt, Inspect Cell LEDs.
Details the Auto, Super Chlorinate, and Off positions of the main switch.
Shows salt concentration, pool temperature, voltage, current, and output percentage.
Discusses factors affecting chlorine production like filter hours, salt, and stabilizer levels.
Recommends inspecting and cleaning the cell every 3 months for maximum efficiency.
Instructions for flushing, scraping, and mild acid washing the cell.
Balancing water for opening and winterization procedures for closing the pool.
Solutions for no power on the Power LED or flashing Generating LED.
Addresses issues with No Flow, Check Salt, and Inspect Cell indicators.
Explains the meaning and resolution for High Salt and Inspect Cell flashing LEDs.
Lists potential reasons for insufficient or no chlorine production from the system.
Details product warranty periods and specific exclusions for components.
Explains how to activate the warranty and the conditions for its validity.
Instructions on contacting the seller and requirements for claim authorization.
Outlines Carvin's options for repair, replacement, or issuing credit for defective products.
Lists part numbers for motherboards, cells, transformers, and unions.
