Do you have a question about the CARVIN STARWHITE and is the answer not in the manual?
Brand | CARVIN |
---|---|
Model | STARWHITE |
Category | Lighting Equipment |
Language | English |
Read and install light per guide. Dangerous if improperly installed. Comply with NEC and local codes.
Use Class A GFCI breaker. Ensure proper grounding. Do not use extension cords.
Ensure pool water level is at least 1 inch below the pool wall opening before installation.
Screw wall plate into main body, trapping gaskets. Ensure water inlet is horizontal.
Align main body key with the light's keyway and assemble parts 5, 4, 7, 3.
Screw compression nut until slight resistance, add 1/4 turn. Position dome for water flow.
Screw chosen union onto main body with locking ring. Connect or glue inlet hose.
Raise the water level to the appropriate level for your pool.
Plug light wire into harness, connect to AC adapter, and plug into outlet. Press rocker switch to light.
Remove most assembly parts for winter, leaving main body, wall plate, and two gaskets.
Apply silicone grease to all STARWHITE o-rings before reassembling.