1
BATTERY MAINTENANCE
LOW BATTERY WARNING
When the battery is low the display shows the "BAT" sign.
You can replace the battery new one.
If you still use the scale without replacing the battery the scale may provide
incorrect result on measurement.
ERROR MESSAGE
ERROR REASONS SOLUTIONS
Err An error of the initial zero range Set the platter empty.
Init Problems on Analog Module
Try to turn OFF and ON the scale.
Call your CAS dealer if still problems.
OFL Overload on the platter
Remove it from the platter
Do not put somthing exceeding maximum
capacity on the platter
UNStA Unstable conditions of scale Make the scale stable conditions
■ How to connect the ground wire.
To Next Page
Loading...
