CAS SW-10 User Manual

Industrial Weighing Sytems assumes no responsibility for the accuracy of the
calibration instructions extracted from manufactureres documentation.
Contact us for complete manuals we may have on file info@iwsystems.ca
Industrial weighing systems provides repairs to all insturments and load cells.
Calibration services available.
Should you require additional information please do not hesitate to contact IWSystems
Check out our products at www.iswystems.ca
Industrial Weighing Systems
9 Richmond St. Picton, ON Canada K0K 2T0
Ph: 613-786-0016 Cell: 613-921-0397 Fax: 613-476-5293
E-mail info@iwsystems.ca Website: www.iwsystems.ca

CAS SW-10 Specifications

General

Capacity	10 kg
Readability	1 g
Display	LCD
Tare Range	Full capacity
Accuracy	±1 g
Auto Power Off	Yes
Operating Temperature	-10°C to 40°C
Units of Measurement	g, kg
Power Source	AC adapter or 4 x AA batteries

Summary

PRECAUTIONS

NAMES AND FUNCTIONS

OVERALL VIEW

Shows the parts of the weighing scale, including platter, display, adjusting bolt, and keyboard.

DISPLAY & KEYBOARD

Details the scale's display interface and the functions of each button on the keyboard.

OPERATIONS

General Weighing

Instructions for basic weighing procedure, including placing a commodity on the platter.

Weighing with Tare

How to subtract the weight of a container to measure only the net weight of the commodity.

How to Convert the Unit of Weight

Steps to change the weighing unit between grams, kilograms, pounds, and ounces.

Hold Function

How to lock the displayed weight on the screen for a stable reading.

How to Set Auto Power Off

Configure automatic power off settings to extend battery life.

ERROR MESSAGE

Error Codes and Solutions

Lists common error messages like 'Err 1' and '0-L' with their respective reasons and resolutions.

SPECIFICATIONS

Model Specifications

Technical details including capacity, minimum division, display type, temperature range, power, and size.