CAS SW-II Series - Page 12

`
12
CAS ELECTRICS CO.,LTD
(4) Press [M] key and then it displays “On1” message
(5) Load middle weight (ex:1/3 full capacity) on the platform
(6) Press [M] key and then it displays “On2 ” message
(7) Load middle weight (ex:2/3 full capacity) on the platform
(8) Press [M] key and then it displays “On3 ” message
(9) Load full weight on the platform
(10) Press [M] key and then, the display will show all the segments and count up "9" to "0".