To Next PageTo Next Page
Need help?Do you have a question about the Casablanca Bullet and is the answer not in the manual?
General| Brand | Casablanca |
|---|---|
| Model | Bullet |
| Category | Fan |
| Language | English |
Ensure proper wiring by using a qualified electrician if unfamiliar and know your wiring.
Secure fan to structure/outlet box and maintain clearance from walls and floor.
Review essential warnings and cautions for safe installation and operation.
Mount on angled ceilings using a longer downrod and potentially an angled mounting kit.
Turn off power before installation. Ensure all four bumpers on the ceiling bracket are attached.
Tighten the downrod setscrew securely with pliers; do not hand-tighten.
Connect the three grounding wires from ceiling, downrod, and bracket using an orange wire connector.
Connect receiver wires (white, black, blue) to corresponding fan wires using blue connectors.
Connect ceiling wires (black, white) to receiver wires (live in, neutral in) using orange connectors.
Connect black wires (ungrounded) and green/bare wires (grounding) from outlet box to wall control.
Attach blades using two blade grommets and two blade assembly screws per blade.
Connect fan wires (blue, white) to light kit wires (black, white) using ceramic wire connectors.
Pair the remote within three minutes of turning power on by pressing buttons simultaneously.
Use remote buttons for fan speed, light control (on/off, dimming), and fan direction.
Always turn off power to the fan before performing any maintenance or changing bulbs.
Check speed buttons, circuit breaker, wall control battery, pairing, and wiring connections.
