How to connect hydraulic hoses to Cascade Power Tool attachment?
To connect hydraulic hoses to the Cascade Power Tool attachment, use Cascade Attachment Installation Kit No. 659245 for non-sideshifting attachments and attachments with solenoid adaption, Kit No. 659249 for sideshifting clamps OR use hoses and fittings as shown.
What to do if I need to connect hose to the valve CLAMP port of Cascade Power Tool?
If you need to connect a No. 6 hose to the valve CLAMP (CL) port on your Cascade Power Tool, use a 6-8 reducer.
General| Brand | Cascade |
|---|---|
| Model | 35D |
| Category | Power Tool |
| Language | English |
Overview of the manual's scope and content.
Explains WARNING, CAUTION, IMPORTANT, and NOTE statements.
Details truck specifications for attachment compatibility.
Specifies hose and fitting requirements for hydraulic supply.
Step-by-step guide for attaching the unit to the truck.
Guide for installing custom arms onto the base.
Pre-operation checks and adjustments for the attachment.
Routine checks and tasks every 100 operating hours.
Tasks to perform every 500 operating hours.
Tasks to perform every 1000 operating hours.
Tasks to perform every 2000 operating hours.
General advice and requirements for troubleshooting.
Hosing diagrams and circuit schematics for top mount valves.
Hosing diagrams for sideshifting attachments.
Hosing diagrams and schematics for center mount valves.
Identifies common issues affecting clamp function.
Troubleshooting steps for electrical circuits.
Step-by-step guide to safely remove the attachment.
Procedures for arm assembly removal and installation.
Procedures for cylinder removal and installation.
Procedures for cylinder disassembly and inspection.
How to adjust and service restrictor cartridges.
Procedures for removing and servicing check valves.
Procedures for disassembling and reassembling the base unit.
Procedures for solenoid valve coil and valve service.
Details hydraulic settings, flow volumes, and fluid requirements.
Lists auxiliary valve functions and their compliance with ITA standards.
Details carriage mount dimensions for ITA compatibility.
Lists torque values for various fasteners in US and metric units.
To Next Page
