Washing the Filter
You can pull the dust container together with the
cleaning system out of their anchoring with the aid
of the carrier handle on the dust container. Take
hold of the carrier handle on the dust container and
pull it upwards. Now pull the dust container out and
loosen the HEPA cover and HEPA lter out of the dust
container with the aid of the lateral unlocking button.
Turn the dust container cover carefully until it is
released and the HEPA lter will come away easily.
Now rinse the HEPA lter under running water and
allow it to dry.
CAUTION : Only ever clean the lter with water and
do not use soap or detergent. These would destroy
the lter.
Place the dry HEPA lter back in the HEPA cover
(or replace with a new one) and t it into the dust
container. Then t the dust container into position in
the cyclone dust container until it ts into place. Your
cyclone vacuum cleaner is now ready for use.
CAUTION : Do not place back the lter if still wet.
To Next Page
Loading...
Need help?
General
