To Next Page

To Previous Page

NEW COMBINE PRODUCT SUPPORT KITS

New Style Header Auger Finger Kits

• For 2006-2007, Model 2010 and 2020 Grain Headers

• Long wearing heat treated auger ﬁnger and hardware

Part No. 87298864 - complete set - 30' Header (shown)

Part No. 87298865 - complete set - 25' Header

Part No. 87298860 - complete set - 20' Header

Part No. 87298867C - two pack kit

Part No. 87298954C - deluxe ﬁnger kit

Part No. 87298864

EZ Latch Single Level Hydraulic Coupler Kit

• Kit includes coupler assembly, hydraulic lines, and hardware

• Kit is designed to make it easier to connect the hydraulics on the

combine to the header

• Couplerfor 1010/1020 Headers, 2200 Corn Heads, andmid-range

Axial Flow Combines

• Combine these kits with the centralized header latch kit for even

greater convenience

Part No. 87552504 - coupler half for 1000 Series Headers

Part No. 87301386E - coupler half for 1644, 1666, 1688, and later combines

Part No. 87662931E - coupler half for 2200 Corn Head

Not New But Improved

• The material thickness on these elbows

and vertical tubes have been increased

by 30% for improved service life

• HVOF wear resistant coating included

with Part No. B96190A–extended

wear elbow

• The elbow grease ring groove has been

modiﬁed to provide more uniform

grease ﬂow and improved service life

Grease lines and mounting hardware

included but not shown.

Part No. B94090A - standard wear

Part No. B96190A - extenda-wear

Heavy-duty Unloading Auger Elbow

Part No. B95650A

Heavy-Duty Vertical Tube

Connected Couplers

Case IH Axial-Flow Series User Manual

Questions and Answers: