EasyManua.ls Logo

Case IH BCAC930HB - Spraying Precautions; Hose Precautions; Installation and Location

Case IH BCAC930HB
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
sAfety
WARNING
Do not spray flammable materials in vicinity of open 
flame or near ignition sources including the compressor
unit.
SPRAYING PRECAUTIONS
17. Do not smoke when spraying paint, insecticides, or other flammable 
substances.
18. Use a face mask/respirator when spraying and spray in a well 
       ventilated area to prevent health and fire hazards.
19. Do not direct paint or other sprayed material at the compressor. 
Locate compressor as far away from the spraying area as possible to 
minimize overspray accumulation on the compressor.
20. When spraying or cleaning with solvents or toxic chemicals, follow 
the instructions provided by the chemical manufacturer.
HOSE PRECAUTIONS
21. Inspect hose before use. Do not exceed working pressure marked 
on hose. Do not twist, bend knot, or abrade hose. Do not wrap hose 
around body.
22. Keep away from hot surfaces and chemicals.
Installation
INSTALLATION AND LOCATION
The compressor must be used on a stable level surface. The air compres-
sor must be used in a clean and well-ventilated area. The compressor 
requires an unobstructed airflow and must be located a minimum of 18 
inches from any walls or other obstructions.
Extension Cord Length Wire Size (A.W.C.)
Up to 25 Feet 14
26 to 50 Feet 12
51 to 100 Feet 10