This document is the Operator's Manual for the CASE IH DX21 and DX24 Tractors, identified by part number 87300158. It serves as a comprehensive guide for owners and operators, providing essential information for the safe and efficient operation, adjustment, and maintenance of these agricultural machines. The manual emphasizes the importance of proper care to ensure the performance and longevity built into the tractors.
Function Description:
The CASE IH DX21 and DX24 Tractors are designed as self-powered and self-propelled machines. Their primary function is to pull or carry various tractor attachments, and when equipped with a front-end loader and a variety of buckets, they are also capable of loading and moving materials. The manual stresses that only attachments recommended and approved by Case IH should be used with these tractors to ensure safe and effective operation.
Important Technical Specifications (as implied by the manual's content):
While specific numerical technical specifications like engine horsepower, dimensions, or weight are not detailed on the provided pages, the manual implicitly covers several key areas related to the tractor's design and components:
- Engine Type: The Federal Emissions Warranty and California Emission Control Warranty Statement sections explicitly refer to "heavy-duty off-road diesel engines." This indicates that both DX21 and DX24 models are powered by diesel engines. The California warranty further specifies coverage for engines from 100 to 150 HP for models from 1997 and later, suggesting these tractors fall within or near this power range, or are subject to similar regulations.
- Emission Control System: A significant portion of the manual is dedicated to the Federal and California Emissions Warranties. This highlights the presence of a sophisticated emission control system designed to meet U.S. Environmental Protection Agency (EPA) and California Air Resources Board (CARB) regulations. Key components of this system, as listed in the warranty sections, include:
- Fuel Injection Pump
- Fuel Injectors
- Turbocharger
- Intake Manifold
- Exhaust Manifold
- Boost Pressure Tubing-connection to Aneroid Device ON F.I.P.
These components are critical for engine performance, fuel efficiency, and compliance with environmental standards.
- Attachments: The tractors are designed to integrate with various attachments, including front-end loaders and buckets, indicating a robust hydraulic system and attachment points capable of handling diverse implements.
- Identification: Each tractor has a unique Model and Product Identification Number, which are crucial for ordering parts and for service. Operators are instructed to locate and record these numbers.
Usage Features:
- Operator Guidance: The manual serves as the primary resource for operators, providing instructions on general operation, adjustments, and maintenance. It is recommended that all operators read the manual carefully and keep it available for ready reference.
- Dealer Support: Case IH dealers play a crucial role in the ownership experience. They are responsible for instructing owners on general operation, providing factory-trained service technicians for questions, and carrying a complete line of genuine Case IH service parts.
- Safety Alerts: The manual incorporates a "CAUTION" safety alert symbol (!), which indicates important safety messages. Operators are warned to carefully read these messages and be alert to the possibility of personal injury or death. This emphasizes the manufacturer's commitment to safety during operation.
- Shielding: The manual notes that illustrations may show protective shielding open or removed for clarity. However, it explicitly instructs operators to close or replace all shielding before operating the machine, reinforcing safety protocols.
- Warranty Compliance: To maintain warranty coverage, operators are responsible for performing all required maintenance as listed in the owner's manual. The use of Case IH Service Parts is recommended for maintenance and repairs to ensure quality and compliance.
Maintenance Features:
- Scheduled Maintenance: The manual outlines "Lubrication and Maintenance" as a dedicated section (3-1), indicating that routine servicing is a critical aspect of tractor ownership. Owners are responsible for performing all required maintenance.
- Genuine Parts: The use of genuine Case IH service parts is strongly recommended for maintenance and repairs. These parts are manufactured and inspected to ensure high quality and accuracy, which is vital for the proper functioning and longevity of the tractor. While non-Case IH parts may be used, the warranty may be denied if such parts cause damage to warranted components.
- Maintenance Records: Owners are advised to retain receipts covering regular maintenance. These records are important in the event of warranty claims and should be passed on to subsequent owners.
- Diagnostic Work: For warranty-related repairs, diagnostic labor that leads to the determination of a defective warranted part is covered if performed at a warranty station.
- Improvements: CNH America LLC, the manufacturer, states its commitment to continuous product improvement. This means that the design and features of the tractors may evolve, and the manual reflects the current state of the product at the time of publication.
In summary, the CASE IH DX21 and DX24 Tractors are robust, heavy-duty off-road diesel machines designed for agricultural tasks such as pulling, carrying attachments, and material handling. The operator's manual is an indispensable resource, emphasizing safe operation, diligent maintenance with genuine parts, and adherence to emission control regulations to ensure the tractor's reliability and long service life.
Need help?
To Next Page
General