Case IH PUMA CVX 150 - Armrest and C-Pillar Controls

8

1. Lowering throttle rear hitch.
2. Sensitivity draft control system.
3. Height limitation rear hitch.
4. Slip control value [%].
5. Remote valve configuration–
oil flow, timer. Push–turn logic.
6. Lift height limitation front hitch.
7. Lowering throttle front hitch,
(FHM only  see page 15).
CONTROL ELEMENTS ON C-PILLAR
1. Hydraulic main switch
Up: Remote valves active
Center: Remotes, rear hitch locked
Down: Remotes + rear hitch active
2. High mounted road lights / LED stripes in bonnet
3. Heated front and rear screen
4. AccuGuide activation
5. ISOBUS class 3 activation / engagement
6. Electronic battery isolator
7. Diagnosis connector
8. 9 pin ISOBUS connector
CONTROLS UNDER LID OF ARMREST
1
2
3
4
5
6
7
8
CONTROL ELEMENTS