Case IH PUMA CVX 240 - A-Pillar Display Information; Multi Function Display Overview; A-Pillar Display Button Functions

9
DISPLAY ON THE A-PILLAR
1 2 3
4
5 6
7 8 9
10 11 12
13 14 15
Engine coolant
temperature
Fuel level
Warning Light
Panel
Engine speed
Target speed
Transmission
status
Ground speed
AdBlue level
1. Change/Scroll 1
2. Raise
3. Change/Scroll 2
4. Program / Input of data
5. Lower
6. Reset
7. Engine oil / air pressure
8. Wheel slip
9. Front & rear PTO speed /
Lift height front & rear hitch
10. Performance data of the tractor
11. Driven distance
12. Area counter
13. Service interval / operating hours
14. Air condition
15. Remote valve settings
MULTI FUNCTION DISPLAY:
- configuration menu
- engine load [%]
- engine oil pressure [bar/%]
- engine oil temperature [°C]
- charge air temperature [°C]
- AdBlue temperature [°C]
- transmission oil pressure [bar]
- transmission oil temp. [°C]
- battery voltage [V]
- pneumatic air pressure [%]
- climate control settings
- slip value [%]
- work performance [ha]
- work performance [ha/h]
- fuel level [litres]
- fuel rate [l/h]
- remaining working time at
present fuel rate [h]
- distance counter [km]
- slow speed indicator [m/min]
- working time [h:min]
- PTO speed front / rear [rpm]
- lift height front / rear hitch [%]
- hydraulic remote valve settings