SECTION 58 - ATTACHMENT/HEADERS - CHAPTER 2
58-16
Secondary Repair Procedure
Determine the location of the fault. If the fault area is
from the center to the right end, perform “Starting
From the Right Side”. If the fault area is left of the
center section, perform “Starting From the Left Side”.
10008321
LEFT RIGHT
TOP
39
Starting From the Right Side
1. Rotate the auger until the access panel on the
right side is at the top. Support the weight of the
auger with a tow motor or other suitable lifting
device.
10007684
40
To Next Page
Loading...
