SAFETY
SAFETY RULES
Your safety and the safety of those around you is highly dependent upon
the care and good judgment you exercise in the use of this equipment. Know
the positions and functions of all controls before attempting to operate. BE
SURE TO CHECK ALL CONTROLS IN A SAFE OPEN AREA BEFORE
STARTING YOUR WORK.
READ THIS MANUAL THOROUGHLY and make sure you understand
its contents. All equipment has limitations. Be sure you understand, for
example, the speed, braking, steering, stability and load characteristics of
this machine before starting to operate.
The safety information presented in this manual is not intended to re-
place safety codes, insurance requirements, federal, state and local laws, rules
and regulations. Know the regulations and laws that apply to your area and be
sure that your machine is properly equipped to meet such laws and regulations.
It is recommended that the following safety rules be posted on the job
site.
A
□
SAFETY
r==7 __
I~-:
Pre-Starting
742672A
WARNING: Before starting engine, studv operator's manual safetv
messages. Read all safetv signs on machine. Clear the area of other per-
sons. Learn and practice safe use of controls before operating.
Ir is vour responsibilitv to understand and follow manufacturer's instruc-
tions on machine operation, service, and to observe pertinent laws and
regulations. Operator and service manuals mav be obtained from vour
equipment dealer.
D-34-2-A
4
Find manuals at https://best-manuals.com
To Next Page
Loading...
