2000-4
Bur 5-10860 Issued 2-08 Printed in U.S.A.
STEP 7
BD03A231
Double up a nylon lifting strap (1) and slide through
the exhaust stack (2) on the hood.
STEP 8
BD07N564-01
Place a solid steel bar through the strap, raise the
hood and release tension on the lifting motor.
STEP 9
BD07N597-01
Remove the right front lift cylinder from the hood.
Repeat the procedure for the left hand side.
STEP 10
BD07N565-01
Remove the rear lift cylinder from the machine.
STEP 11
BD07N566-01
Tag and disconnect hood wiring harness connector
and backup alarm connector from rear chassis wiring
harness connector.
STEP 12
BD07N567-01
Have another person balance the hood, and remove
the hood hinge mounting bolts (1) located outside the
hood by the cab (2) from the cooler frame. Repeat
procedure for the other side.
1
2
2
1
To Next Page
Loading...
