2000-5
Bur 5-10860 Issued 2-08 Printed in U.S.A.
STEP 13
BD03A232
Carefully raise and remove hood from loader. Lower
hood onto suitable platform and disconnect lifting
equipment.
STEP 14
BD07N568-01
Tag and disconnect engine wiring harness connector
from air filter restriction switch.
STEP 15
BD07N569-01
Loosen clamp on air cleaner intake hose and remove
the crankcase ventilation hose.
STEP 16
BD07N569-01
Loosen clamps on turbocharger and air cleaner,
remove the intake hose.
STEP 17
BD07N590-01
Remove the air cleaner by removing the four bolts.
STEP 18
BD07N569-01
Loosen the clamp on the turbocharger for the after
cooler inlet hose.
To Next Page
Loading...
