1001-4
TORQUE SPECIFICATIONS- METRIC HARDWARE
Use the following torques when specifications are not
given.
These values apply
to
fasteners with both coarse and
fine threads as received from supplier, plated or
unplated, or when lubricated with engine oil. These
values
do not
apply
if
graphite
or
Molydisulfide
grease
or
oil is used. Use of a
click
type
torque
wrench, or better
is
required.
Grade 8.8 Bolts, Nuts, and Studs
®
Bur 7-52931
Grade 10.9 Bolts, Nuts, and Studs
Grade 12.9 Bolts, Nuts, and Studs
Usually the torque values specified for grade 10.9
fasteners can
be
used satisfactorily
on
grade 12.9
fasteners.
Issued 9-98 Printed
in
U.S.A.
Find manuals at http://best-manuals.com/search?&s=CASE-643571
To Next Page
Loading...
