1002-4
.
ENGINE OIL RECOMMENDATIONS
Case AKCELA No. 1 Engine oil is recommended
for use in your Case engine. Case AKCELA No. 1
Engine Oil will lubricate your engine correctly
under all operating conditions.
If Case AKCELA No. 1 Multi-Viscosity Oil is not
available, use only oil meeting API engine oil service
category CH
-4 (preferred) or CG-4.
See the chart below for
recommended viscosity at
ambient air temperature
ranges.
NOTE: Do not put performance
additives or other oil additive
products in the engine
crankcase. The oil change
intervals given in this manual
are according to tests with Case
AKCELA lubricants.
BD03A102
BC02N250
To Next Page
Loading...
