Case 821B - Page 34

2001-16
STEP 74
Disconnect
the
cables and wires from the master dis-
connect switch. Fasten
an
identification tag to one of
the cables and one of the wires.
Pull
the cables and
wires through
the
radiator shroud.
Put
the cables and
wires out of
the
way.
STEP 75
Loosen and remove the self-locking nuts, hardened
washers, and bolts that fasten
the
front of each side of
the radiator shroud to the frame.
STEP 76
Loosen and remove the self-locking nuts, hardened
Nashers, and bolts that fasten the rear of each side of
the
radiator shroud to the frame.
=iac
7-60130
STEP 77
Disconnect the top radiator hose.
STEP 78
B8980109M
Disconnect the small hose.
STEP 79
Loosen and remove the cap screws, lock washers, and
flat washers, that fasten the guard to the
fan
shroud.
NOTE:
There
may be spacers between
the
guard and
the
fan
shroud.
Issued 7-93 Printed
in
US
A