2001-22
STEP 112
Push the compressor toward the engine and remove
the belt from the pulley of the compressor.
STEP 113
Loosen and remove the nut, lock washer, and flat
washer from the bolt at the base of the compressor.
STEP 114
lemove the bolt and flat washers that fasten the com-
)ressor to the bracket.
lac
7-60130
STEP 115
Use a piece of wire to tie the compressor so that the
compressor
is
out of the
way.
STEP 116
Loosen and remove the self-locking nuts and flat
washers on the U-bolt that fasten
the
fuel filler neck to
the
frame. Remove
the
U-bolt.
STEP 117
88980613M
Loosen the top hose clamp at the bottom of the
fuel
filler
neck and remove
the
fuel
filler neck. Cover or plug the
opening
in
the fuel tank.
Issued 7-93 Printed
in
US
A
To Next Page
Loading...
