6-46540 ENG Issued 07-11 Printed in Brazil
1002-6
RECOMENDAçõES DE VISCOSIDADE DO ÓLEO E FLUIDOS
Oil Viscosity and Temperature Ranges
Case No. 1 Engine Oil is recommended for use in your Case Engine. Case Engine Oil will lubricate your engine correctly under
all operating conditions.
If Case Multi-Viscosity Engine Oil is not available, use only oil meeting API engine oil service category CH-4 (preferred) or CG-
4.
See the chart on following page for recommended viscosity at ambient air temperature ranges.
NOTE: Do not put Performance Additives or other oil additive products in the engine crankcase. The oil change intervals given
in this manual are according to tests with CASE lubricants.
50º40º30º20º10º0º-10º-20º-30º-40º
122º104º86º68º50º32º14º-4º-22º-40º
SAE 20W-50
SAE 15W-40
CASE AKCELA Nº 1 15W-40
SAE 10W-30
SAE 5W-30
CASE AKCELA Nº 1 10W-30
SAE 0W-30
TROPIC
ALL SEASONS
WINTER
ARCTIC
ARCTIC
NOTE:
Use of an engine oil pan heater or an engine coolant heater may be required when operating temperatures are in Winter or Artic conditions
TEMPERATURE FAHRENHEIT
TEMPERATURE CELSIUS
ALL SEASONS
WINTER
Hydraulic / Brake / Transmission System – Temperature Ranges
50º40º30º20º10º0º0º-10º-20º-30º-40º
122º104º86º68º50º32º14º-4º-22º-40º
CASE AKCELA Hy-Tran Ultra
AKCELA AW HYDRAULIC FLUID 68 HV
CASE AKCELA Hy-Tran Ultra SSL
TEMPERATURE FAHRENHEIT
TEMPERATURE CELSIUS
To Next Page
Loading...
