SAFETY PRECAUTIONS
1.1 GENERAL SAFETY INFORMATION
& WARNING &
Do Not operate or perform any maintenance on
this machine until all instructions found in the OP-
ERATION & MAINTENANCE MANUAL have been
thoroughly read and understood.
Improper operation or maintenance of this machine
may cause accidents and could result in serious
injury or death.
Always keep the manual in the operator's seat
pocket.
If it is missing or damaged, place an order with an
authorized CASE Distributor for a replacement.
If you have any questions, please consult an au-
thorized CASE Distributor.
1.
Most accidents, which occur during operation, are
due to neglect of precautionary measures and
safety rules. Sufficient care should be taken to
avoid these accidents. Erroneous operation, lu-
brication or maintenance services are very dan-
gerous and may cause injury or death of person-
nel. Therefore all precautionary measures,
NOTES, DANGERS, WARNINGS and CAU-
TIONS contained in the manual and on the ma-
chine should be read and understood by all per-
sonnel before starting any work with or on the ma-
chine.
2. Operation, inspection, and maintenance should
be carefully carried out, and safety must be given
the first priority. Messages of safety are indicated
with marks. The safety information contained in
the manual is intended only to supplement safety
codes, insurance requirements, local laws, rules
and regulations.
3. Messages of safety appear in the manual and on
the machine : All messages of safety are identi-
fied by eighter word of "DANGER", "WARNING"
and "CAUTION".
a. DANGER- Indicates an imminently hazard-
ous situation which, if not avoided, will result in
death or serious injury and is represented as
follows:
& DANGER &
b. WARNING- Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury and is represented as
follows:
'! WARNING ffi
c. CAUTION- Indicates a potentially hazardous
situation which, if not avoided, may result in mi-
nor or moderate injury. It may also be used to
alert against possible damage to the machine and
its components and is represented as follows:
4. It is very difficult to forecast every danger that may
occur during operation. However, safety can be
ensured by fully understanding proper operating
procedures for this machine according to meth-
ods recommended by CASE.
5. While operating the machine, be sure to perform
work with great care, so as not to damage the
machine, or allow accidents to occur.
6. Continue studying the manual until all Safety, Op-
eration and Maintenance procedures are com-
pletely understood by all persons working with the
machine.
1.2 SAFETY PRECAUTIONS
ffi WARNING ffi
The proper and safe lubrication and maintenance
for this machine, recommended by CASE, are out-
lined in the OPERATOR'S MANUAL for the ma-
chine.
Improper performance of lubrication or mainte-
nance procedures are dangerous and could result
in injury or death. Read and understand the
MANUAL before performing any lubrication or
maintenance.
The serviceman or mechanic may be unfamiliar with
many of the systems on this machine. This makes it
important to use caution when performing service
work. A knowledge of the system and or components
is important before the removal or disassembly of
any component.
Because of the size of some of the machine compo-
nents, the serviceman or mechanic should check the
weights noted in this manual. Use proper lifting pro-
cedures when removing any components. Weight of
components table is shown in the section ; SPECI-
FICATIONS.
00-1-2
Find manuals at https://best-manuals.com
To Next Page
Loading...
