Case W20F - Page 19

INTRODUCTION
•
Disconnectthebatteriestoplacealoadonthemwithaloadtester.
•
Afteranyworkisperformed,verifythatthebatteryclamppolarityiscorrectandthattheclampsaretightandsafe
fromaccidentalshortcircuitandoxidation.
•
Beforedisconnectinganypipelines(pneumatic,hydraulic,fuelpipes,etc.),verifythatallpressurehasbeenre-
leased.Takeallnecessaryprecautionsbleedinganddrainingresidualpressure.Alwayswearthepropersafety
equipment.
•
Donotalterthelengthsofanywires.
•
DonotconnectanyelectronicservicetooltotheengineelectricalequipmentunlessspecicallyapprovedbyCASE
CONSTRUCTION.
•
DonotmodifythefuelsystemorhydraulicsystemunlessapprovedbyCASECONSTRUCTION.Anyunauthorized
modicationwillcompromisewarrantyassistanceandmayaffectengineoperationandlifespan.
Forengineequippedwithanelectroniccontrolunit
•
Donotweldonanypartoftheequipmentwithoutremovingthecontrolunit.
•
Removetheincaseofworkrequiringheatingover80°C(176°F).
•
Donotpaintthecomponentsandtheelectronicconnections.
•
Donotalteranydataledintheelectroniccontrolunitdrivingtheengine.Anymanipulationoralterationofelectronic
componentswillvoidenginewarrantyassistanceandmayaffectthecorrectworkingorderandlifespanofthe
engine.
RespectoftheEnvironment
•
Respectoftheenvironmentshouldbeofprimaryimportance.Takeallnecessaryprecautionstoensurepersonnel's
safetyandhealth.
•
Informthepersonnelofthelawsregardingthedispensingofusedengineuids.
•
Handlebatterieswithcare,storingtheminawellventilatedenvironmentandwithinanti-acidcontainer.
48096018A18/05/2018
12