Cashmaster One - Product Firmware Updates Manual

Introduction
An update to your Cashmaster Printer One has been released.
The update is installed using a USB flash drive, which must first
be loaded with the supplied update files.
Pre-requisites
Please ensure your scale has
a minimum 50% battery charge
level and is connected to the
mains power supply.
Step 1: Prepare USB flash drive
1.1 Insert an empty USB flash drive into your PC's USB port.
1.2
Save the update ZIP file that you have received to your
PC - for example, on to your Desktop.
1.3 Open the ZIP file, and copy all of the contents
(including the Printer_firmware folder) to your
USB flash drive.
1.4
The USB flash drive is now ready to update the
Cashmaster One product.
Step 3: Update printer
bootloader and firmware
2.1 Press the main power key to switch on
your unit if necessary.
2.2 Ensure the main system battery level is
above 50% before proceeding.
2.3 Insert the USB flash drive – the USB flash
drive icon will appear in the status bar.
2.7
2.8
2.9
2.10
Cashmaster One range - Product firmware updates
10521A 1
Cashmaster One range - Product firmware updates
10521A 2
U:\Printer_Firmware\CM9002A.BIN
U:\Printer_Firmware\CB8013C-BLU.bin
2.4
2.5
05.03.2017 09:10
2.6
*
*
*
*
*
The software numbers are provided as an example only.