Specifying the Barometric
Pressure Unit
You can specify either hectopascals (hPa) or
inches of mercury (inHg) as the display unit for
barometric pressure values.
Important!
●
When Tokyo (TYO) is the Home City,
the barometric pressure unit is fixed as
hectopascals (hPa) and cannot be
changed.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (E) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Example: When your Home City is
London
3. Press (D) 12 times.
This displays [UNIT].
4. Use (B) to select a barometric pressure
unit.
[hPa]: Hectopascals
[inHg]: Inches of mercury
Inches of mercuryHectopascals
5. Press (E) twice to complete the setting
operation.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Specifying the Temperature
Measurement Unit
You can select either Celsius (°C) or
Fahrenheit (°F) as the temperature display
unit.
Important!
●
When Tokyo (TYO) is the Home City,
the temperature unit is fixed as Celsius
(°C) and cannot be changed.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (E) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Example: When your Home City is
London
3. Press (D) 12 times.
This displays [UNIT].
4. Use (C) to select a temperature unit.
[°C]: Celsius
[°F]: Fahrenheit
5. Press (E) twice to complete the setting
operation.
Watch Operation Guide 3513
25
To Next Page
Loading...
