Casio 3552 User Manual

Measuring a Split Time or Lap
Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
●
Each press of (A) displays the time
elapsed from the start of the stopwatch
operation up to that point (split time) and
the elapsed time for a specific segment
(lap time).
D
A
D
Stop
Split/lap
Start
●
Split times and lap times are both
displayed at the same time. Lap and
split times up to the one hour are shown
in 1/100-second units. Subsequent
measurements after one hour are
shown in 1-second units.
[SPL]: Split time
[LAP]: Lap time
Minutes
Minutes
Seconds Minutes
Seconds
1/100 seconds
Hours
Seconds
Time Number* Time Number*
After first hourFirst hour
* [F] is displayed for the final time
number when an elapsed time
measurement operation is stopped.
3. Press (A) to reset the measurement time
to all zeros.
Viewing the Current Time
While in the Stopwatch Mode
Pressing (A) while the stopwatch is reset to all
zeros causes the current time to appear in the
lower section of the screen. Press (A) again to
return to the normal stopwatch display.
Measurement
Measurement
Current time
Viewing Measured Time Data
Viewing Saved Data
You can use the operation below to view split
times and lap times.
1. Enter the Recall Mode.
l
Navigating Between Modes
●
This causes the latest measurement
number and date to appear.
Record number
Measurement date
Measured time
2. Press (A) to cycle through measurement
numbers.
●
Each time you press (A), the next older
measurement number appears.
A
A
A
A
3. Press (D) to display the lap time of the
currently displayed lap number.
[LAP]: Lap time
[SPL]: Split time
Note
●
A record of the measured data is
created and assigned a number for
each measurement operation (from
start to stop).
Watch Operation Guide 3552
21

Casio 3552 Specifications

General

Brand	Casio
Model	3552
Category	Watch
Language	English